Hear from Our Customers
Your marble looks how it’s supposed to again. The glossy finish returns. Scratches disappear. Stains lift out.
You’re not covering up damage or masking problems. You’re reversing them. That’s what marble polishing and restoration in Forest Hills Gardens does when it’s done right—it brings the stone back to the condition it was in when it was first installed.
And it protects your investment. Homes in Forest Hills Gardens sell between $950,000 and $4.3 million. Well-maintained marble keeps that value intact. Neglected stone costs you when it’s time to sell, or worse, forces you into expensive replacement work that could’ve been avoided.
This isn’t about making old stone look “good enough.” It’s about making it look like the day it went in.
NYC Stone Care is a family-owned marble restoration service in Forest Hills Gardens, NY. We’ve restored over one million square feet of marble, limestone, terrazzo, and granite across New York and the tri-state area.
Our work isn’t subcontracted out. You’re not getting a different crew every time or someone learning on your floors. You’re getting trained stone techs who’ve gone through intensive training on the most current restoration techniques.
Forest Hills Gardens has some of the most beautiful Tudor Revival homes in Queens, many with original marble installations that deserve proper care. We understand what’s at stake when you’re maintaining a luxury property in one of the area’s most prestigious neighborhoods. You need someone who knows the difference between cleaning marble and ruining it.
We start with an assessment. Not every marble floor needs the same level of work, so we look at the current condition, identify the damage, and explain what’s required to restore it.
Then we get to work. For scratches and dullness, we use diamond abrasives to remove the damaged layer and bring the stone back to a smooth, even surface. This is done on-site, and 99% of the time it’s dust-free. For deeper damage like cracks or chips, we repair the stone structurally before refinishing.
Once the surface is restored, we polish it. This is where the shine comes back—the natural gloss that makes marble look the way it should. We’re not applying a coating that wears off. We’re bringing out the stone’s own finish.
Finally, we seal it. A proper sealant protects against future stains, etching from acidic spills, and daily wear. It’s not invincible, but it gives you time to clean up spills before they become permanent problems.
Ready to get started?
You get the full scope of marble restoration near you—cleaning, polishing, crack repair, stain removal, and sealing. We handle countertops, floors, showers, vanities, and any other marble surface in your home.
Forest Hills Gardens homes often have original or high-end marble installations that require more than standard cleaning. Harsh chemicals and improper methods cause etching and dullness that most cleaning companies can’t reverse. We can. We use the right tools and techniques to restore the stone without causing further damage.
You also get honest advice. If your marble doesn’t need a full restoration, we’ll tell you. If regular maintenance would serve you better than a complete refinish, we’ll say that too. Our goal is to give you the result you’re paying for, not upsell you on work you don’t need.
We’re fully insured, and we offer free consultations. You’ll know what the job involves and what it costs before we start.
Most residential marble floor restoration projects take one to three days depending on the size of the area and the extent of damage. A small bathroom might be done in a few hours. A large foyer or kitchen could take longer.
The process itself isn’t slow—it’s thorough. We’re not rushing through to get it done. We’re making sure the stone is properly leveled, polished, and sealed so it lasts.
You can usually walk on the floors within a few hours after we’re done, but we recommend waiting 24 hours before placing furniture back or exposing the surface to heavy use. If we’ve applied a sealant, it needs time to cure fully.
Most stains can be removed, but it depends on what caused the stain and how long it’s been there. Oil-based stains, water rings, and organic stains like coffee or wine usually come out with the right treatment.
Etching is different. That’s not a stain—it’s damage to the surface from acidic substances like lemon juice, vinegar, or certain cleaners. Etching looks like a dull spot or watermark, and it requires polishing to fix, not just cleaning.
If a stain has been sitting for years and has penetrated deep into the stone, it may not come out completely. But in most cases, we can remove or significantly lighten it. We’ll assess it during the consultation and let you know what’s realistic.
In almost every case, yes. Restoration costs a fraction of replacement and delivers the same result—marble that looks new again.
Replacing marble means tearing out the old stone, which is expensive, messy, and time-consuming. You’re paying for demo, disposal, new material, and installation. You’re also dealing with dust, noise, and downtime.
Restoration brings the existing stone back to its original condition without any of that. The only time replacement makes sense is if the marble is structurally compromised—cracked beyond repair or installed incorrectly. Otherwise, restoration is the smarter move.
It depends on traffic and use. High-traffic areas like entryways and kitchens may need professional polishing every one to three years. Low-traffic areas like bathrooms or guest spaces can go longer.
Regular cleaning and resealing help extend the time between restorations. If you’re wiping up spills quickly, using pH-neutral cleaners, and not dragging furniture across the floor, your marble will hold up better.
You’ll know it’s time for restoration when the stone starts looking dull even after cleaning, or when you notice scratches and etching that weren’t there before. Those are signs the surface layer is worn and needs professional attention.
No. We work on-site and keep the process contained. Our equipment is designed for dust-free operation, so you’re not dealing with stone dust settling on furniture or floating through the air.
We protect surrounding areas—baseboards, walls, cabinetry—before we start. If we’re working on a floor, we’ll make sure adjacent rooms and surfaces are covered or sealed off.
Forest Hills Gardens homes often have detailed woodwork, custom finishes, and high-end furnishings. We’re careful. This isn’t our first time working in luxury properties, and we understand what’s expected when you’re maintaining a home at this level.
We restore marble, granite, limestone, terrazzo, travertine, and concrete. Each stone type requires different techniques and tools, and we’re trained on all of them.
Marble is softer and more prone to scratching and etching, so it needs a gentler approach. Granite is harder and more durable, but it can still lose its polish over time. Limestone and travertine are porous and require careful sealing.
If you have multiple stone surfaces in your home, we can handle all of them in one visit. You’re not calling different companies for different materials. We do it all.
Local Resources
Useful Links
Other Services we provide in Forest Hills Gardens
