Hear from Our Customers
You stop noticing the dullness every time you walk through your foyer. The etching from last month’s wine spill disappears completely. Your marble floors reflect light again instead of absorbing it.
That’s what marble restoration in Ditmas Park, NY does. It brings back the gloss, removes the damage, and makes your stone look maintained instead of worn down.
Most homeowners in Ditmas Park live in historic homes with original or period-appropriate marble. That stone wasn’t cheap when it went in, and replacing it now costs anywhere from $100 to $200 per square foot. Restoration runs $5 to $25 per square foot depending on condition. You’re looking at saving 80% or more while keeping the original character of your home intact.
The process also protects your investment long-term. Restored and properly sealed marble resists staining, holds up better against acidic spills, and requires less maintenance. You’re not just fixing a cosmetic issue—you’re extending the life of the stone and cutting down on the time and money you’ll spend cleaning it.
NYC Stone Care is a family-owned marble restoration service with over 40 years of hands-on experience. We’ve worked on hundreds of Brooklyn homes, including plenty of the Victorian and Colonial Revival properties that define Ditmas Park, NY.
We’re not a franchise. We’re not a cleaning company that added stone care as a side service. This is what we do—marble polishing and restoration, marble refinishing, repair work on natural stone that other contractors won’t touch.
Ditmas Park has around 2,500 historic residential buildings, most built between 1902 and 1914. That means a lot of original marble, a lot of aged stone, and a lot of homeowners who need someone who knows how to work with older materials without causing more damage. We’ve handled brownstone entryways, original fireplace surrounds, vintage bathroom installations—the kind of work that requires actual skill, not just equipment.
First, we assess the stone. We’re looking at the level of etching, scratching, staining, and overall wear. Not every floor needs the same treatment, and we’re not going to upsell you on services that won’t make a difference.
If your marble has deep scratches or heavy etching, we start with honing. That’s a controlled grinding process using diamond abrasives that removes a thin layer of stone to eliminate surface damage. It’s precise work—go too deep and you create low spots, don’t go deep enough and the damage stays visible.
After honing, we move to polishing. This is where the shine comes back. We use progressively finer abrasives and polishing compounds to bring the stone up to a high gloss. The result is a smooth, reflective surface that looks like new marble.
Finally, we seal the stone. Marble is porous, which means it absorbs liquids. A quality sealer fills those pores and gives you time to wipe up spills before they turn into stains. We use commercial-grade sealers that last years, not months.
The whole process for an average room takes one to two days depending on size and condition. You’ll need to stay off the floors while they dry, but there’s no major disruption to your home.
Ready to get started?
You get a full assessment before we start any work. We’ll tell you what’s fixable, what’s not, and what your options are. No pressure, no upselling—just a clear explanation of what your marble needs.
The restoration itself includes honing to remove scratches and etching, polishing to restore the natural shine, and sealing to protect against future damage. If you have cracks or chips, we handle repairs as part of the process using color-matched epoxy that blends with the stone.
Ditmas Park homes deal with specific challenges. The neighborhood’s tree-lined streets mean more organic debris tracked indoors. Older homes often have settling issues that create uneven floors and cracked stone. We account for these factors when we work on your marble, adjusting our approach based on what your specific property needs.
We also handle ongoing maintenance if you want it. Some homeowners prefer annual or bi-annual polishing to keep their marble looking sharp. Others just want the restoration done once and they’ll take it from there. Both options work.
You’re also getting over four decades of experience with natural stone. We’ve seen every type of damage, every type of marble, every type of installation issue. That means fewer surprises, faster work, and better results than you’d get from a general contractor or a newer company still figuring things out.
Most marble restoration projects in Ditmas Park, NY run between $5 and $25 per square foot depending on the condition of the stone and the level of work required. Light polishing on marble that’s in decent shape sits at the lower end. Heavily damaged floors with deep etching, scratches, or staining cost more because they require honing before polishing.
For context, a standard 200-square-foot entryway usually costs between $1,000 and $3,000 for full restoration. That includes honing, polishing, and sealing. Compare that to replacement, which runs $100 to $200 per square foot for new marble plus installation, and you’re saving tens of thousands of dollars.
We give you a flat quote after assessing the stone. No hourly rates, no surprise charges. You’ll know exactly what it costs before we start.
Yes. Etching happens when acidic substances like lemon juice, wine, vinegar, or certain cleaners dissolve the calcium carbonate in marble. It leaves dull spots that look like watermarks or cloudy patches. Standard cleaning won’t fix it because the damage is in the stone itself, not on top of it.
We remove etching through honing and polishing. Honing grinds away the damaged layer using diamond abrasives, then polishing brings the surface back to a high gloss. The process is the same whether the etching is on a countertop, floor, or fireplace surround.
If the etching is light, sometimes polishing alone is enough. Deeper etching requires honing first. Either way, the etch marks disappear completely, and the stone looks uniform again. After we’re done, we seal the marble to give you more time to clean up spills before they etch the surface again.
Most residential marble restoration projects in Ditmas Park, NY take one to two days depending on the size of the area and the condition of the stone. A small bathroom or entryway might be done in a few hours. A large foyer or multiple rooms can take a full day or more.
Honing and polishing are the time-intensive parts. We’re working in stages with progressively finer abrasives, and each stage has to be completed properly before moving to the next. Rushing the process leaves visible scratches or an uneven finish.
After polishing, the sealer needs time to cure. You’ll need to stay off the floors for at least a few hours, sometimes overnight depending on the product we use. We’ll give you a specific timeline when we assess your marble so you can plan accordingly.
Yes, and it’s often the best option for preserving the original character of historic homes in Ditmas Park, NY. Older marble can handle restoration as long as it’s done correctly. The key is understanding how the stone was installed and what kind of wear it’s experienced over the decades.
Historic marble often has thinner sections, uneven surfaces from settling, or previous repair work that needs to be accounted for. We adjust our approach based on what we’re working with. That might mean lighter honing, hand polishing in delicate areas, or using specific techniques to avoid damaging surrounding materials like original tile or woodwork.
We’ve restored marble in plenty of Victorian and Colonial Revival homes throughout Brooklyn. The stone in these properties is usually high-quality material that responds well to professional restoration. You’re not risking the integrity of the marble—you’re bringing it back to how it looked when the house was built.
If regular cleaning isn’t bringing back the shine, you’re dealing with damage that needs restoration. Dullness that doesn’t respond to mopping, visible scratches, etch marks, or stains that won’t lift are all signs the stone needs professional work.
Cleaning removes dirt and grime sitting on the surface. Restoration removes damage that’s in the stone itself—scratches, etching, embedded stains, and worn-down areas that have lost their polish. If your marble looks cloudy, feels rough, or has spots that stay dull no matter what you use on them, cleaning won’t fix it.
You can test this yourself. Wipe down a section of your marble with water and a soft cloth. If it looks better wet but goes back to looking dull when it dries, the stone has lost its polish and needs restoration. If it still looks dirty or stained even when wet, you’ve got deeper issues that require honing and polishing to correct.
Yes. We handle marble restoration service throughout Brooklyn and the greater New York City area. Ditmas Park is one of many neighborhoods we work in regularly, but we’re not limited to one location.
If you’re in Park Slope, Prospect Heights, Carroll Gardens, Brooklyn Heights, or anywhere else in the borough, we can restore your marble. We’ve been serving Brooklyn homeowners for over a decade and have worked on properties in nearly every neighborhood.
The process is the same regardless of where you’re located. We come out for an assessment, give you a clear quote, and schedule the work at a time that fits your schedule. If you’re outside Ditmas Park but still in Brooklyn or nearby, reach out. We’ll let you know if we can get to you and when.
Local Resources
Useful Links
Other Services we provide in Ditmas Park
