Hear from Our Customers
Your marble looked incredible when it was first installed. That deep shine, the way light moved across the surface, the smooth feel underfoot—it made the space feel expensive because it was.
Now it’s dull. Scratched from years of foot traffic. Etched from wine spills or the wrong cleaning products. Maybe there are stains in the grout lines that won’t budge no matter what you try.
Here’s what changes after professional marble restoration in Stuyvesant Square, NY: the surface gets ground down to remove damage, then honed and polished back to a factory finish. Etching disappears. Scratches vanish. That reflective shine comes back, and the stone looks like it did on day one. You’re not covering up damage—you’re removing it at the surface level and rebuilding the finish properly.
The space feels cleaner, brighter, more valuable. And if you’re selling or renting, restored marble gives buyers and tenants a reason to pay more. It’s one of the few upgrades that actually shows immediate visual ROI.
We’re a family-owned marble restoration service in Stuyvesant Square, NY, with over 40 years of hands-on experience. We’ve worked in landmark buildings, historic brownstones, and luxury apartments throughout Gramercy and the surrounding neighborhoods.
Stuyvesant Square has some of the most beautiful historic architecture in Manhattan. The marble in these buildings wasn’t installed yesterday—it’s been walked on, lived with, and sometimes improperly maintained for decades. Restoring it correctly takes more than equipment. It takes an understanding of how natural stone behaves, how different marbles respond to grinding and polishing, and how to match repairs so they’re invisible.
We’re not a cleaning company that dabbles in stone care. This is all we do. And we don’t leave until the floor looks right.
We start with an inspection. Not every marble floor needs the same level of work, and we’re not going to grind down your stone if it only needs polishing. We look at the damage—etching, scratches, lippage, stains—and recommend the process that makes sense.
If the marble is scratched or etched, we use diamond abrasive grinding to remove the damaged layer. This isn’t buffing. We’re physically removing the top surface where the damage lives, then working through progressively finer grits to smooth and refine the stone. Once the surface is level and scratch-free, we move into honing and polishing to bring back the shine.
If there are cracks or chips, we fill them with color-matched resin before grinding. If grout lines are stained or crumbling, we clean or replace them. If the marble has lippage—uneven tiles that create trip hazards—we grind those down flush.
After polishing, we seal the marble. This doesn’t make it stain-proof, but it gives you time to wipe up spills before they soak in. The whole process is dustless, and we don’t leave until the floor looks like it was just installed.
Ready to get started?
When we restore marble floors in Stuyvesant Square, NY, you’re getting a complete process—not just a surface polish. That means grinding, honing, polishing, sealing, and any necessary repairs to cracks, chips, or grout.
We handle all types of marble: Carrara, Calacatta, Crema Marfil, Emperador, Travertine—whatever’s in your space. We also work on countertops, bathroom vanities, shower walls, and fireplace surrounds. If it’s natural stone and it’s damaged, we can fix it.
Stuyvesant Square is full of pre-war buildings with original marble installations. A lot of these floors have been walked on for 80+ years, and they’re still structurally sound—they just need the surface restored. That’s a huge advantage over replacing the stone, which would cost tens of thousands of dollars and require demolition, disposal, and reinstallation.
Restoration costs a fraction of replacement. You keep the original stone, maintain the historic character of the space, and end up with a finish that looks brand new. For property owners in this neighborhood, that’s not just about aesthetics—it’s about preserving value in one of Manhattan’s most sought-after residential areas.
Professional marble restoration in Stuyvesant Square, NY typically runs between $10 and $25 per square foot, depending on the condition of the stone and the level of work required. If your marble just needs polishing, you’re on the lower end. If it needs grinding to remove deep scratches or etching, plus crack repairs and sealing, expect to be closer to the higher end.
A 200-square-foot entryway might cost $2,000 to $5,000 to fully restore. A 1,000-square-foot lobby could run $10,000 to $25,000. These aren’t small numbers, but compare that to replacement: new marble installation in Manhattan can easily cost $50 to $100+ per square foot when you factor in demo, disposal, materials, and labor.
We give free estimates. We’ll look at your floors, tell you what they need, and give you an honest price. No surprises, no upselling.
Yes. Etch marks are physical damage caused by acidic liquids—wine, lemon juice, vinegar, certain cleaners—that dissolve the calcium in marble and leave dull spots. No amount of cleaning will fix them because they’re not stains. The surface has been eaten away.
The only way to remove etch marks is to grind and polish the marble. We use diamond abrasives to remove the damaged layer, then hone and polish the stone back to a smooth, reflective finish. The etch marks disappear completely because we’ve removed the layer where the damage occurred.
This works on countertops, floors, vanities, and any other marble surface. If the etching is severe, we may need to grind deeper, but the end result is the same: a restored surface that looks like the damage never happened.
For a typical residential marble floor restoration in Stuyvesant Square, NY, expect one to three days depending on square footage and the scope of work. A small bathroom or entryway might take one day. A full-floor apartment with 500+ square feet of marble could take two to three days.
The process involves multiple steps—grinding, honing, polishing, sealing—and each step needs to be done carefully. We’re not rushing through to get to the next job. We’re making sure the stone is level, the scratches are gone, and the polish is even across the entire surface.
We work around your schedule as much as possible. If you need us to work on weekends or after hours to minimize disruption, we can usually accommodate that. And we use dustless equipment, so you’re not dealing with a mess all over your apartment.
Properly restored and sealed marble will hold its shine for years if you maintain it correctly. The polish we create during restoration is a physical finish—we’ve refined the surface to a point where it reflects light evenly. That doesn’t wear off overnight.
What does dull marble over time is abrasive dirt, improper cleaning products, and acidic spills. If you’re using a vacuum or dust mop regularly to remove grit, wiping up spills quickly, and cleaning with a pH-neutral stone cleaner, your marble will stay glossy for a long time.
We seal the marble after polishing, which gives you a buffer against staining and etching. The sealer doesn’t prevent damage—it buys you time to clean up before liquids soak in. Resealing every one to two years is smart maintenance, and we can handle that when the time comes.
Yes. A lot of our work in Stuyvesant Square, NY involves historic brownstones and pre-war apartment buildings with original marble installations. These floors have been in place for decades, sometimes over a century, and they’re often in better structural shape than newer stone—they just need surface restoration.
Historic marble requires a careful approach. We’re not using harsh chemicals or aggressive techniques that could damage old stone. We assess the condition, test a small area first, and adjust our process based on how the marble responds.
Stuyvesant Square was designated a historic district in 1975, and many of the buildings here have landmark status. If you’re restoring marble in one of these properties, you want someone who understands how to work with aged stone and respects the integrity of the original installation. We’ve been doing this in Manhattan for over 40 years, and we’ve worked on some of the most recognized buildings in the city.
In most cases, yes. Small to medium cracks and chips can be filled with a color-matched epoxy resin that bonds to the marble and hardens to a stone-like finish. Once it’s cured, we grind and polish the repair flush with the surrounding surface. If it’s done right, the repair is nearly invisible.
This works well for hairline cracks, corner chips, and small divots. If a tile is severely cracked or broken into multiple pieces, replacement might be the better option—but that’s rare. Most damage we see in Stuyvesant Square apartments and townhouses is fixable without tearing out the stone.
Filling and polishing a crack costs a fraction of what you’d pay to remove and replace a tile, especially if the marble is discontinued or hard to match. And it’s faster—we can repair and restore in the same visit, so you’re not waiting weeks for new material to arrive.
Local Resources
Useful Links
Other Services we provide in Stuyvesant Square
