Hear from Our Customers
Your marble looks the way it did when it was first installed. That means no more dull spots in high-traffic areas, no more etching from spills, and no more explaining away the condition of your floors to visitors or potential buyers.
In Tribeca, where median home prices sit around $3.8 million, first impressions aren’t just nice to have—they’re expected. Lobby floors, kitchen counters, bathroom vanities: these surfaces set the tone for your entire space. When they’re restored properly, you’re not just fixing a cosmetic issue. You’re protecting an investment.
The difference shows up in how much easier your floors are to maintain afterward. Restored marble resists staining better. It cleans faster. And if you’re preparing to sell or lease, it photographs better and commands attention during showings in ways that worn stone simply can’t.
We’re a family-owned marble restoration company that’s been working in Manhattan for over 40 years. We’re led by a master craftsman who’s seen every type of marble damage you can imagine—and plenty you probably haven’t.
We’ve worked in Tribeca long enough to know what matters here. You’re not looking for the cheapest option. You’re looking for someone who won’t damage your stone further, who shows up when they say they will, and who understands that your time is limited. We do free estimates because we’d rather you know what you’re dealing with upfront than waste anyone’s time with surprises later.
Our technicians are trained on diamond abrasive grinding and modern restoration techniques. We work on residential properties, commercial buildings, and everything in between across the tri-state area.
We start with a free evaluation of your marble. That means looking at the type of stone you have, the extent of damage or wear, and what it’ll take to bring it back. We’ll tell you what’s realistic and what isn’t.
The actual restoration uses diamond abrasive grinding. This process removes the damaged outer layer of your marble without harsh chemicals or acids that make things worse. We’re not buffing or coating over problems—we’re removing them. The stone gets ground down carefully until we reach clean, undamaged material.
After grinding, we polish the marble in stages to bring back its natural shine. Depending on the finish you want, we can go high-gloss or honed. If your marble has cracks or chips, we repair those first so the surface is uniform before polishing begins.
The final step is sealing. A quality sealer protects your marble from future staining and etching, especially important in kitchens and bathrooms where spills happen. The whole process leaves your floors looking like new stone, not like something that’s been “fixed.”
Ready to get started?
Our marble restoration service in Tribeca, NY covers the full process: evaluation, repair, grinding, polishing, and sealing. You’re not paying for multiple companies to come in at different stages. We handle it start to finish.
If your marble has cracks, chips, or broken pieces, we repair those before starting the restoration. If there’s heavy staining or etching from acidic cleaners, we address that during the grinding phase. The goal is a uniform surface that looks consistent across the entire floor or countertop.
Tribeca properties often feature marble in entryways, lobbies, and kitchens—high-visibility areas where wear shows up fast. We’ve restored marble in luxury condos, historic buildings, and commercial spaces throughout the neighborhood. Each project gets the same level of attention because we know how much these properties are worth and what’s at stake if the work isn’t done right.
We also offer maintenance services after restoration. Marble doesn’t stay perfect forever, but with the right care, you can go years between major restoration work. We’ll walk you through what that maintenance looks like so you’re not guessing.
Cost depends on the size of the area, the condition of your marble, and what type of finish you want. Most residential projects in Tribeca range from a few hundred square feet to entire floors, and pricing reflects the labor and materials involved in diamond grinding and polishing.
We offer free estimates because the only way to give you an accurate number is to see the stone in person. Some marble just needs polishing. Other floors have deep etching, stains, or damage that requires more intensive grinding. Trying to quote that over the phone doesn’t help anyone.
What we can tell you is that restoring marble before selling or leasing a property typically pays for itself. In a market where homes sell for $3.8 million on average, the difference between dull, worn floors and restored stone affects buyer perception and final offers. It’s not about spending money—it’s about protecting value you’ve already built.
Most residential marble restoration projects take one to three days, depending on square footage and the extent of damage. A small bathroom might be done in a few hours. A full lobby or open-concept living area takes longer.
The process can’t be rushed. Diamond grinding requires multiple passes at different grits to remove damage without creating new problems. Polishing takes time to build up the shine in stages. And sealing needs to cure properly before the floor can handle regular foot traffic again.
We’ll give you a timeline during the estimate so you can plan around it. If you’re preparing for a showing or event, let us know upfront. We’ve worked around tight schedules before, but we won’t cut corners to meet a deadline if it means compromising the result. You’re better off knowing what’s realistic from the start.
Yes. Etching happens when acidic substances like lemon juice, wine, or vinegar eat into the marble’s surface. It leaves dull spots that don’t come out with regular cleaning. Stains are different—they’re discoloration that’s absorbed into the stone.
For etching, we use diamond abrasives to grind away the damaged layer and re-polish the surface. It’s the same process we use on floors, just on a smaller scale. For stains, we assess what caused them and whether they’ve penetrated deep enough to require grinding or if a poultice treatment can pull them out.
Kitchen and bathroom countertops in Tribeca see a lot of use, and most of the marble damage we see comes from improper cleaning. A lot of household cleaners are too harsh for natural stone. Once we restore your countertops, we’ll explain what products are safe to use so you’re not creating the same problem six months later.
Polishing is the final step in restoration, but it’s not the same thing. If your marble is scratched, etched, or stained, polishing alone won’t fix it. You’re just buffing a damaged surface, which doesn’t address the underlying problem.
Restoration involves grinding down the marble to remove damage, then polishing it to bring back the shine. Think of it like refinishing a wood floor—you’re not just applying a new coat of finish, you’re sanding away the worn layer first.
A lot of companies offer “marble polishing” as a standalone service, and that’s fine if your stone is in good shape and just needs a refresh. But if you’ve got real damage—dullness that won’t go away, visible etching, or stains that have been there for months—you need full restoration. We’ll tell you which one makes sense for your situation during the free evaluation.
We restore marble, granite, limestone, travertine, and slate. The process varies depending on the stone type because each one has different hardness and porosity. Marble and limestone are softer and more prone to etching, so they require careful grinding. Granite is harder and holds up better to wear, but it can still lose its polish over time.
The diamond abrasive grinding process works across all these stone types, but the grit levels and polishing compounds change based on what we’re working with. That’s why experience matters. Using the wrong technique on the wrong stone can cause more damage than it fixes.
If you’re not sure what type of stone you have, we can identify it during the estimate. A lot of people assume they have marble when it’s actually limestone or travertine. It doesn’t change whether we can restore it, but it does affect how we approach the work.
Use a pH-neutral cleaner made for natural stone. Most household cleaners—especially anything with vinegar, bleach, or ammonia—will damage your marble over time. You want something that cleans without etching the surface or breaking down the sealer.
Wipe up spills quickly, especially acidic ones like wine, coffee, or citrus. Even with a sealer, marble is porous enough that liquids can penetrate if they sit too long. It’s not about being paranoid, just about not letting things sit overnight.
Reseal your marble every one to three years depending on traffic. High-use areas like entryways and kitchens need it more often. You’ll know it’s time when water stops beading on the surface and starts soaking in instead. We can handle resealing as part of ongoing maintenance, or you can do it yourself with the right product. Either way, it’s a small step that prevents bigger problems down the road.
Local Resources
Useful Links
Other Services we provide in Tribeca
