Hear from Our Customers
You get marble that reflects light the way it did when your building first opened. The etching from decades of foot traffic disappears. Stains that survived countless cleaning attempts—gone.
This isn’t buffing or surface polishing. It’s diamond abrasive grinding that removes damaged layers and rebuilds the finish from the stone up. Your floors look factory-new because we’re reproducing the exact process that created them originally.
The difference shows up immediately. Your cleaning crew will notice. Your guests will notice. And if you’re preparing to sell or rent, appraisers notice too—restored natural stone can add up to 25% to property values in Manhattan’s luxury market.
We’ve worked on marble in Tudor City apartments, lobbies, and common areas for over 15 years. We’re a family-owned restoration company, not a cleaning service that dabbles in stone. Our master craftsman has 40+ years of hands-on experience with every type of marble damage you’ll find in pre-war Manhattan buildings.
We’ve restored floors in landmark museums and historic theaters across the city. That same level of craftsmanship applies whether we’re working on 500 square feet in a Tudor City bathroom or 5,000 square feet in a lobby. The stone doesn’t care about the size of the job—it cares about the skill of the person holding the grinder.
You’re not getting a crew that learned stone work last month. You’re getting technicians trained in techniques that most cleaning companies don’t even know exist.
We start with a free assessment of your marble’s condition. Not every floor needs the same level of work, and we’ll tell you exactly what yours needs—no upselling, no vague “it depends” answers.
If you move forward, we use diamond abrasive grinding to remove the damaged surface layer. This isn’t sanding. We’re working with industrial diamond pads in progressively finer grits, the same method factories use to finish marble slabs. We grind away etching, scratches, and stains until we reach undamaged stone.
Then we rebuild the finish. Depending on what you want—high gloss, honed, or something in between—we polish the marble to the exact sheen level you’re after. Finally, we seal it with a penetrating sealer that protects against future staining without changing the appearance.
The process is dusty and loud, but we contain the work area and clean thoroughly when we’re done. Most residential jobs in Tudor City take one to three days depending on square footage and damage severity.
Ready to get started?
You get complete marble floor restoration in Tudor City—grinding, polishing, and sealing. We handle furniture moving if needed. We protect surrounding areas from dust and debris. And we don’t leave until the floor matches the finish level we agreed on during assessment.
This matters in Tudor City specifically because many apartments still have original 1920s marble in bathrooms and entryways. That stone has historical value beyond just aesthetics. We treat it accordingly. You’re not getting a one-size-fits-all approach designed for new construction marble—you’re getting restoration methods appropriate for pre-war natural stone.
We also handle repairs if your marble has chips, cracks, or missing pieces. We color-match epoxy fills to your specific stone and grind them flush with the surrounding surface. Once polished, most repairs become nearly invisible.
The sealer we apply isn’t the hardware store variety. It’s a commercial-grade penetrating sealer that soaks into the marble’s pores and repels liquids from within. Your marble stays protected without that plastic-looking coating you see on poorly sealed floors.
Most Tudor City marble restoration projects run between $4 and $18 per square foot depending on the stone’s condition and the finish level you want. A typical bathroom floor of 40-60 square feet usually costs $300-$800. Larger spaces like entryways or combined kitchen-dining areas cost more based on square footage.
The wide price range reflects the work involved. Light restoration on marble that just needs polishing sits at the lower end. Heavily damaged floors with deep etching, stains, or scratches that require aggressive grinding and repair work cost more. We give you an exact quote after seeing your floors—no surprises, no “starting at” pricing that doubles once we arrive.
That’s still a fraction of replacement cost. New marble installation in Manhattan runs $15-$40 per square foot before you factor in demolition, disposal, and downtime. Restoration costs less, finishes faster, and keeps your original stone intact.
Yes. Water stains and etching are exactly what diamond grinding removes. Etching happens when acidic substances dissolve the marble’s surface—it looks like dull spots or watermarks that won’t buff out. Water stains occur when minerals in the water penetrate the stone and leave discoloration.
Both problems live in the top layer of marble. When we grind that layer away, the stains and etching go with it. We’re not covering damage or trying to polish it out—we’re removing it entirely and exposing fresh, undamaged stone underneath.
The exception is staining that’s penetrated deep into the marble. Some stains—especially old ones that sat untreated for years—go deeper than we can safely grind. In those cases, we’ll tell you upfront during the assessment. Most stains in Tudor City apartments are surface-level or shallow enough to remove completely.
Properly restored and sealed marble in Tudor City apartments typically stays in excellent condition for 3-5 years with normal residential use. High-traffic areas like building lobbies need re-polishing more frequently—usually every 1-2 years.
The longevity depends on how you maintain it. If you’re using pH-neutral cleaners and wiping up spills quickly, your marble will hold its finish longer. If your cleaning crew is using acidic bathroom cleaners or abrasive scrubbing pads, you’ll see etching return within months.
We seal every floor we restore, which buys you time against staining. But sealers wear down with foot traffic and cleaning. Most Tudor City clients have us come back every few years for re-polishing and re-sealing—it’s much faster and cheaper than the initial restoration because the marble’s already in good shape.
It’s dusty and loud, but we contain the mess. Diamond grinding creates fine marble dust, and our equipment runs loud enough that you won’t want to be in the apartment during the work. Most Tudor City clients leave for the day or stay in another room while we work.
We seal off the work area with plastic barriers and run dust extraction equipment that captures most of the airborne particles. We also put floor protection on any areas we need to cross to reach your marble. When we finish, we vacuum and damp-mop everything before we leave.
The disruption usually lasts one to three days for residential spaces. Bathrooms typically take one day. Larger areas or heavily damaged floors take longer. We’ll give you a realistic timeline during the assessment so you can plan accordingly. Most Tudor City apartments are occupied during restoration—you just need to be okay with construction noise during working hours.
Polishing is surface work. Restoration rebuilds the marble from the stone up. If your marble just looks dull but has no scratches, stains, or etching, polishing might be enough. We buff the surface with fine polishing compounds to bring back shine.
Restoration is what you need when polishing won’t fix the problem. Scratches, etching, stains, and surface damage require grinding—removing the damaged layer entirely. Then we polish the fresh stone underneath to whatever finish level you want.
Many cleaning companies in Manhattan offer “marble polishing” but don’t have the equipment or training for actual restoration. They’ll buff your floors and make them shinier temporarily, but the scratches and etching remain. Six months later, you’re back where you started. Real restoration fixes the underlying damage, not just the symptoms.
Yes. We restore marble countertops, vanities, shower walls, windowsills, fireplace surrounds—any marble surface in your Tudor City apartment. The process is the same: diamond grinding to remove damage, polishing to rebuild the finish, and sealing for protection.
Countertops and vanities actually need restoration more often than floors because they’re exposed to more acidic substances. Coffee, wine, citrus, and bathroom products all etch marble on contact. Most Tudor City bathrooms we work in have marble vanity tops with etching around the sink from years of soap and toiletry exposure.
Vertical surfaces like shower walls are trickier to restore because we’re working against gravity, but we have the equipment and experience to handle it. We’ve restored marble in some of the most complicated installations in Manhattan—landmark buildings, historic theaters, museum galleries. A Tudor City bathroom is well within our capabilities.
Local Resources
Useful Links
Other Services we provide in Tudor City
